Chisel adapter
Product details
- Unit: piece
- Delivery time: 1-2 tööpäeva
- free.transport.product.page
25,00 €
The attachment module for sharpening chisels is compatible with R2, M3 and Pro V8 Hapstone sharpeners. Suitable for sharpening chisel blades, planer blades and other such cutting blades. Possible sharpening angle from 11 to 45 degrees.
The chisel holder is mounted on a platform for interchangeable nozzles and fixed on it with two bolts. The tool is pressed to the holder with a clamp, which has 6 holes for mounting, which allows you to securely fasten the blades of different configurations (straight and inclined end chamfers) and width. The maximum width of the tool which allows to clamp the holder - 71 mm. For comfortable fixing of the tool with handles it is necessary that the length of a working part, for example, a chisel was more than length of a bed (more than 92 mm) that the handle did not interfere with clamping on all plane of a cloth.
The sharpening angle can be set by the position of the hinge of the horizontal guide on the vertical rack.
The chisel holder is mounted on a platform for interchangeable nozzles and fixed on it with two bolts. The tool is pressed to the holder with a clamp, which has 6 holes for mounting, which allows you to securely fasten the blades of different configurations (straight and inclined end chamfers) and width. The maximum width of the tool which allows to clamp the holder - 71 mm. For comfortable fixing of the tool with handles it is necessary that the length of a working part, for example, a chisel was more than length of a bed (more than 92 mm) that the handle did not interfere with clamping on all plane of a cloth.
The sharpening angle can be set by the position of the hinge of the horizontal guide on the vertical rack.